Maintenance Warnings - Loma IQ3X Operating Instructions Manual

Operating Instructions

5.1 Maintenance Warnings

The following safety warnings apply when carrying out maintenance operations on a Loma IQ3X
Metal Detection System:
1. LETHAL HAZARD - ELECTRICAL SUPPLIES
2. LETHAL HAZARD - COMPRESSED AIR SUPPLIES
3. NON-IONIZING RADIATION
4. WORKING ON EQUIPMENT
5. REJECT DEVICES
For details see the Safety Warnings section.
Suitably qualified peronnel must carry out maintenance and replacement work
only.
Before doing any work on the system the power and air supply must be switched
OFF, as well as taking all necessary precautions against it being accidentally
switched ON again or its parts moving without warning.
Replace worn or faulty components with original spare parts.
The above instructions are aimed at ensuring problem free and safe operation of the system.
The manufacturer declines all liability for injury to persons and damage to components due to
the use of non-original parts and non-routine work that modifies the safety requirements without
the manufacturers express prior authorisation.
The user must schedule and implement a regular cleaning programme for all
surfaces and recesses to avoid dust build-up.
Any non-metallic parts are to be cleaned using a damp cloth only.
For cleaning do not use solvents or other similar products, soapy water or
chlorinated foam is OK.
Copyright © Loma Systems
80
Original Document