Configuring The Host Channels - Adaptec DuraStor 7220SS User Manual

3
Select Set Date and press Enter.
The Set Date prompt appears.
4
Type the date using this format: mm/dd/yyyy. Press Enter.
The system confirms that you want to make the change.
5
Select Yes and press Enter to make the change.
The system confirms that the change is made.
6
Press Esc to return to the Configuration menu.
To set the controller's time:
1
From the System Menu, select Configuration Menu and press
Enter.
The Configuration menu appears.
2
Select Set Date/Time and press Enter.
The Set Date/Time menu appears.
3
Select Set Time and press Enter.
The Set Time prompt appears.
4
Type the time using the 24-hour clock format: hh:mm:ss. Press
Enter.
The system confirms that you want to make the change.
5
Select Yes and press Enter to make the change.
The system confirms that the change is made.
6
Press Esc to return to the Configuration menu.

Configuring the Host Channels

You can configure the settings for each host channel individually.
The settings available for configuration vary based on which mode
you are using. Table 5-1
are available, and what they do.
lists the host channel settings, when they
Configuring the Controller
5-3