Figure 3-18: Secure The Rack/Cabinet Bracket - Acnodes PC 5170 User Manual

Make sure the retention screw holes at the rear of the PC 5170 frame are
Step 3:
aligned with the retention screw holes in the cabinet/rack bracket.
Secure the cabinet/rack bracket to the monitor by inserting and tightening the
Step 4:
retention screws (Figure 3-18).

Figure 3-18: Secure the Rack/Cabinet Bracket

Slide the PC 5170 flat panel PC with the attached cabinet/rack bracket into a
Step 5:
rack or cabinet (Figure 3-19).
PC 5170 Flat Panel PC
Page 65