Table of Contents
Advertisement
Before getting started, read the following important cautions.
1.
The
PC 8175
operating system. An operating system must be loaded first
before installing any software into the computer.
2. Be sure to ground yourself to prevent static charge when
installing the internal components. Use a grounding wrist strap
and place all electronic components in any static-shielded
devices. Most electronic components are sensitive to static
electrical charge.
3.
Disconnect the power cord from the PC 8175 before making
any installation. Be sure both the system and the external
devices are turned OFF. Sudden surge of power could
ruin
PC 8175 is properly grounded.
4. The brightness of the flat panel display decreases with usage.
However, hours of use vary depending on the application
environment.
5. Turn OFF the system power before cleaning. Clean the
system using a cloth only. Do not spray any liquid cleaner
directly onto the screen. The PC 8175 may come with or w/o
a touch screen. Although the touch screen is chemical
resistant, it is recommended that you spray the liquid cleaner
on a cloth first before wiping the screen. In case your system
comes without the touch screen, you must follow the same
procedure and not spray any cleaner on the flat panel directly.
6. Avoid using sharp objects to operate the touch screen.
Scratches on the touch screen may cause malfunction or
internal failure to the touch screen.
7. The flat panel display is not susceptible to shock or vibration.
When assembling the PC 8175, make sure it is securely
installed.
1
Safety Precautions
does
not
come
sensitive
components.
equipped
with
an
Make
sure
the
Advertisement
Table of Contents
