Table of Contents
Advertisement
PC 6150/FPC6150 User's
The PC6150 / FPC6150 provides lots of flexible ways for you to
select different configuration such as CPU, CD-ROM and more. The
chapter will show you how to install the hardware. It includes:
CPU
DRAM
Hard Disk
2.1
CPU and DRAM Installation
The standard PC6150 / FPC6150 system was designed Pentium M
level CPUs. The build-in CPU board provides one 184-pin DDR
DIMM socket that supports system memory up to 1GB. And, there
is one mini-PCI type-III Socket.
When upgrading the CPU, DRAM, or PCI, refer to the following
instructions and illustration:
1. Unscrew screws to remove the rear chassis.
2. Remove the riser card fix kit.
10
Manual
C h a p t e r
Hardware Installation
CD-ROM
Add-on Card
Serial Port
Hardware Installation
2
VGA
Ethernet
Mountings
Advertisement
Table of Contents
