Selecting The Picture And Sound - Sony PCS-1500 Service Manual

Adjusting the Camera
If the frame is repeatedly extended to the full screen
The camera does not recognize the subject. Press the AUTO
TRACK button on the Remote Commander again and go back
to step 2.
If the lamp at the side of the lens lights up
The camera is not capturing the memorized subject correctly.
In this case, perform the pan/tilt operation so that the subject
comes into the screen. Or have the subject memorized onto the
camera again.
Note
When the frame does not track the subject, repeat steps 2 and 3
until the frame starts tracking the subject while adjusting the
lighting and the portion of the subject so that the color and
brightness of the subject is optimized.
46
Chapter 2 Basic Operation During a Meeting

Selecting the Picture and Sound

You can select the picture and sound from both the local and
remote sites equipment.
1
Press the DISPLAY FAR/NEAR button on the Remote
Commander.
Each time you press the button, the picture on the monitor
screen switches between the local and the remote.
2
Press one of the INPUT buttons on the Remote
Commander to switch the picture on the screen.
MAIN: Displays the picture from the main camera.
OBJECT: Displays a picture of the equipment (This is
soon-to-be-available) via the IR sensor on the front
panel.
VIDEO/TV: Each time you press this button, the picture is
switched among all the connected equipment (including
the main camera).
MAIN (Main camera) n OBJECT (Via the IR sensor) n
VIDEO IN AUX 1 n VIDEO IN AUX 2 n MAIN
(Main camera) n ......
The following indications appear on the monitor screen
according to the input.
MAIN: The main camera is selected.
AUX1: The equipment connected to the VIDEO IN AUX
1 jack is selected.
AUX2: The equipment connected to the VIDEO IN AUX
2 jack is selected.
3
Press the AUDIO button on the Remote Commander to
switch the audio input.
Each time you press this button, the audio input switches
as follows:
Microphone n External input n Microphone and
external input n Microphone n ......
Chapter 2 Basic Operation During a Meeting
47