Answering Calls In Manual Answer Mode; Checking The Connection Status - Sony PCS-1500 Service Manual

Receiving a Call

Answering Calls in Manual Answer Mode

When your system is in manual answer mode, you need to
connect incoming calls manually.
When a call comes in, the Compact Processor starts ringing,
and the indication "Incoming Call Answer?" appears on the
monitor screen.
1
Press the EXEC button on the Remote Commander.
Once the connection has been made, the remote party
appears on the local monitor screen, and local party
appears on the remote screen. You are now ready to hold
your meeting.
The indication "MEETING STARTS!" appears on the
monitor screen.
If you do not want to receive a call
Press the CANCEL button on the Remote Commander.
The Compact Processor stops ringing.
If you are operating the system when a call comes in
The indication "PLEASE CLOSE THIS MENU" appears on
the monitor screen. If you receive the call, finish the current
operation. If you cannot receive the call according to your
current operations, ignore it and continue with the current
operation.
When the system fails to make a connection
The indication "CANNOT COMPLETE CONNECTION"
appears along with an ISDN cause code and a message on the
monitor screen.
For details on ISDN cause codes and messages, see "On
Screen Messages" on page 95.
32
Chapter 2 Basic Operation During a Meeting

Checking the Connection Status

During a meeting, you can check the status of the
communication. Elapsed time also appears on the monitor
screen during a meeting.
1
Press the MENU button on the Remote Commander.
The Menu (System Configuration Index 1/3) menu appears
on the monitor screen.
2
Select the COMMUNICATION STATUS with the joy
stick, then press it.
The Communication Status menu appears on the monitor
screen.
Communication Status
CODEC :
LINE I/F :
RATE :
AUDIO MODE :
VIDEO MODE :
FRAME RATE :
CAMERA CONTROL :
DATA CONTROL :
3
Check the status:
CODEC: Displays the codec system.
LINE I/F: Displays the line interface being used.
RATE: Displays the number of lines and the transfer rate
being used.
AUDIO MODE (Encode): Displays the audio encoding
system at the local system.
AUDIO MODE (Decode): Displays the audio decoding
system at the local system.
VIDEO MODE (Encode): Displays the video encoding
system at the local system.
VIDEO MODE (Decode): Displays the video decoding
system at the local system.
Chapter 2 Basic Operation During a Meeting
00:05
H.320
BRI
1 x 64K
(Encode) (Decode)
G.728 G.728
H.263 CIF H.263 CIF
15 15
OFF
OFF
Exit: CANCEL
33