Selecting The Input Picture And Sound; Switching The Displayed Picture Between The Local And Remote Pictures; Selecting The Input Picture - Sony Ipela PCS-XG80S Operating Instructions Manual

Selecting the Input Picture and Sound

You can switch the picture displayed on the monitor screen, and switch
between the input picture and audio.
Switching the Displayed Picture between the Local and Remote
Pictures
When the displayed picture on the monitor can be switched during
communication, pressing the LAYOUT button on the Remote Commander
displays the indication "F1: Switches the monitored picture between the
remote and local sites." at the bottom of the monitor.
Each press of the F1 button on the Remote Commander switches the displayed
picture between those on the local and remote sites.

Selecting the Input Picture

1
Press the VIDEO INPUT button on the Remote Commander.
The Video Input > Near menu appears.
Video Input > Near
2
Use the V, v, B or b button on the Remote Commander to select the video
input on the local site, then press the ENTER button.
The picture input from the selected equipment is displayed on the monitor
screen.
CAMERA: Selects the picture from the camera connected to the
CAMERA connector.
S VIDEO: Selects the picture from the equipment (second camera, etc.)
connected to the S VIDEO IN connector.
RGB: Selects the picture from the equipment connected to the RGB IN
connector.
YPbPr: Selects the picture from the equipment connected to the VIDEO
IN YPbPr jacks.
3
To store the selected input in the memory of the system, use the V, v, B or
b button on the Remote Commander to select "Save", then press the
ENTER button.
The Video Input menu disappears.
142
Selecting the Input Picture and Sound
CAMERA S VIDEO RGB YPbPr
Save Cancel