3-1. Overall Function
3. Interface between camera (PCS-C150/C150P) and remote commander (PCS-R150) :
The IR receiver on the front panel of the camera (PCS-C150/C150P) receives the SIRCS signal that is
transmitted from the remote commander (PCS-R150). The SIRCS signal is then sent to the compact
processor (PCS-P150/P150P) after the carrier component is removed.
n
Whether the IR receiver of the camera (PCS-C150/C150P) or that of the compact processor
(PCS-P150/P150P) is used for receiving the SIRCS signal, is determined by the system configuration
and the user setup. (Refer to Operating Instructions.)
4. Interface between compact processor (PCS-P150/P150P) and
Power :
Power of about 2.9 V DC is supplied to an external microphone (PCS-A300) from the compact
processor (PCS-P150/P150P). (Plug-in Power)
Audio signal :
The audio signal of _33 dBs from external microphone is input to the compact processor
(PCS-P150/P150P).
3-1-2. Function of Compact Processor (PCS-C150/C150P)
1. User interface functions
. LED display of operating status
. Receiving and decoding of the SIRCS signal from the remote commander (PCS-R150)
. Generation and output of the menu display
. Input and selection of video signals
. Receiving and demodulation of infrared video signals (AV-Link)
. Output of the video signals
. Input and selection of audio signals
. Pick-up of sound by the built-in microphone
. Output of the audio signals
. Generation and output of the ringer and other sounds
. Control of the camera (PCS-C150/C150P)
. Generation and output of the SIRCS signal for monitor control
2. Communication functions
. Compression and coding of input video signals
. Compression and coding of input audio signals
. Input of the T.120 data and generation of the remote terminal control data
. Multiplexing of video, audio and T.120 input data, and creation of transmission frame before
sending out to line
. Control of lines (ISDN, V.35) and data transmitting/receiving
. Frame detection and separation from the received data from the line
. Output of the T.120 data and execution of the control data that is supplied from the remote terminal
. Decoding and decompression of audio data
. Decoding and decompression of video data
. Cancellation of audio echo
3. Others
. Serial data input/output for debugging
. Memory card interface for re-writing the software
3-2
external microphone (PCS-A300/option): Mini-jack
Infrared ray
PCS-1500/1500P