Removing The Cabinets - Sony PCS-1500 Service Manual

2-4. Removing the Cabinets

n
To protect the inside of the unit from damage, be sure to
turn off the main power, remove the AC adapter jack, and
perform the following procedure.
1. Loosen the two screws of the upper cabinet. Slide the
camera block in the direction of the arrow while
raising up it and remove it from the hook of the upper
cabinet.
2. Remove the six screws and remove the upper cabinet.
3. Remove the three connectors from the MA-97 board
(CN601, CN602, CN901).
n
Standard tightening torque : 80 x 10
PCS-1500/1500P
_2
N.m {8 kgf.cm}
Main power switch
Jack
Holes
Upper cabinet
Hooks
Upper cabinet
CN901
MA-97 board
B3 x 10
2-4. Removing the Cabinets
AC adapter
Camera block
Screws
CN602
CN601
B3 x 10
2-3