Selecting The Picture And Sound - Sony PCS-1600 Operating Instructions Manual

Selecting the Picture and Sound

You can select the picture and sound from both the local and
remote sites equipment.
To switch the picture
To switch the picture displayed on the monitor from
the local or remote picture
Press the FAR/NEAR button on the Remote Commander, then
switch the picture by selecting the icons on the monitor screen
with the joystick on the Remote Commander.
Each time you press the button, the picture on the monitor
screen switches between the local and the remote.
To switch the video that will be sent to the remote
sites
Press the VIDEO INPUT SELECT buttons on the Remote
Commander to switch the picture on the screen.
To switch the sound
Set Input Select in the Audio Setup menu as follows:
MIC: The microphone is selected.
AUX: The external equipment is selected.
MIC + AUX: Both the microphone and the external equipment
For details on the Input Select item, see "Audio Setup Menu"
on page 108.
Note
The audio input of the remote cannot be switched from the
local system.
64
Chapter 2 Basic Operation During a Meeting
Main: The main camera is selected.
Object: The optional PCS-DS150/DS150P Document Stand
is selected.
AUX1: The equipment connected to the VIDEO IN AUX 1
jack is selected.
AUX2: The equipment connected to the VIDEO IN AUX 2
jack is selected.
are selected.