Calling An Unregistered Remote Party - Sony PCS-1500 Service Manual

Calling a Remote Party

Calling an Unregistered Remote Party

1
Press the START ( ) button or one of the number buttons
(0 – 9) on the Remote Commander.
The Manual Dial menu appears on the monitor screen.
Manual Dial
A1
A2
B1
B2
C1
C2
SELECT:
Note
The B1 to C2 boxes are only displayed when you have
installed the optional PCS-I150 BRI Board.
2
Enter the telephone number of the remote party to have a
meeting with in the A1 and A2 boxes.
Move the joy stick up or down to select the box, then enter
the number with the number buttons on the Remote
Commander.
• To delete a telephone number, press the CLEAR button
on the Remote Commander. The number entered are
deleted.
• To copy a telephone number, press the LINE COPY
button or the joy stick on the Remote Commander. The
number entered are copied to the next box.
• To delete the last number, press the BACK SPACE
button on the Remote Commander, or move the joy stick
to the left. The last number is deleted.
Note
Do not enter your prefix number in these boxes.
24
Chapter 2 Basic Operation During a Meeting
Dial? Yes: No: CANCEL
If you want to check or change the settings of the Dial Setup
menu, follow step 3; dial the number, follow step 6.
3
Press the EXEC button on the Remote Commander.
The Dial Setup menu appears on the monitor screen.
Dial Setup
LINE I/F :ISDN BRI
ISDN RATE :AUTO
AUDIO MODE :G. 728 & G. 722
VIDEO MODE :H. 263 CIF 15fps
CAMERA CONTROL :H. 281
DATA :OFF
SELECT: Save? Yes: EXEC No: CANCEL
4
Set up or check the following items:
LINE I/F: Selects the line interface.
ISDN RATE: Selects the ISDN transfer rate.
AUDIO MODE: Selects the protocol for the audio
encoding.
VIDEO MODE: Selects the protocol for the video
encoding.
CAMERA CONTROL: Selects whether to control the far
end camera.
DATA: Selects whether to have a T.120 data meeting.
For details on each setting of the items, see "On Items in
the Dial Setup Menu" on the next page.
• To select an item to be changed, select an item with the
joy stick on the Remote Commander, then press it.
• To set up an item, select a setting with the joy stick on the
Remote Commander, then press it.
• To cancel the setup, press the CANCEL button on the
Remote Commander.
Chapter 2 Basic Operation During a Meeting
25