GE AF-650 GP Programming Manual page 24

How to Program
•
Parameter ID-30 Fault Log: Error Code to
parameter ID-32 Alarm Log: Time.
Manual Restore of Factory Settings
1. Disconnect from mains and wait until the display
turns off.
2. Press [Status] - [Main Menu] - [OK] during power-
up.
3. Release the keys after 5 s.
4. The frequency converter is now programmed
according to default settings.
Manual restores all except:
•
Parameter ID-00 Operating hours.
•
Parameter ID-03 Power Up's.
•
Parameter ID-04 Over Temp's.
•
Parameter ID-05 Over Volt's.
NOTICE
A manual restore also resets serial communication, RFI
filter settings (parameter SP-50 RFI Filter), and fault log
settings.
DET-618D
AF-650 GP™ Programming Guide
02/2016 All rights reserved.
2 2
23