GE AF-650 GP Programming Manual page 143

Parameter Descriptions
LC-16 RS-FF Operand R
Option:
[44] Reset key
[45] Left key
3 3
[46] Right key
[47] Up key
[48] Down key
[50] Comparator 4
[51] Comparator 5
[60] Logic rule 4
[61] Logic rule 5
[70] Logic Controller Time-out 3
[71] Logic Controller Time-out 4
[72] Logic Controller Time-out 5
[73] Logic Controller Time-out 6
[74] Logic Controller Time-out 7
[75] Start command given
[76] Digital input x30 2
[77] Digital input x30 3
[78] Digital input x30 4
[90] ATEX OL cur. warning
[91] ATEX OL cur. alarm
[92] ATEX OL freq. warning
[93] ATEX OL freq. alarm
[94] RS Flipflop 0
[95] RS Flipflop 1
[96] RS Flipflop 2
[97] RS Flipflop 3
[98] RS Flipflop 4
[99] RS Flipflop 5
[100] RS Flipflop 6
[101] RS Flipflop 7
[102] Relay 1
[103] Relay 2
[108] Relay 7
[109] Relay 8
[110] Relay 9
3.20.3 LC-2# Timers
Parameters to configure the Logic Controller (LC) timers.
Timers are used to define when an event can occur.
LC-20 Logic Controller Timer
Range:
0 [0 - 0] Enter the value to define the duration of the false
*
output from the programmed timer. A timer is only
142
Function:
[Reset] is pressed. Only
available on the graphical LCP.
[◄] is pressed. Only available
on the graphical LCP.
[►] is pressed. Only available
on the graphical LCP.
▲
[ ] is pressed. Only available
on the graphical LCP.
▼
[ ] is pressed. Only available
on the graphical LCP.
X34/Relay Option OPCRLY.
X34/Relay Option OPCRLY.
X34/Relay Option OPCRLY.
Function:
LC-20 Logic Controller Timer
Range:
3.20.4 LC-4# Logic Rules
Parameters to configure the Logic Controller (LC) Logic
Rules. Logic Rules are used to define what conditions need
to be met for the LC to step to the next event.
LC-40 Logic Rule Boolean 1
Array [6]
Option:
[0] False Select the first boolean (TRUE or FALSE) input for the
*
LC-41 Logic Rule Operator 1
Array [6]
Option:
[0] DISABLED
*
[1] AND
[2] OR
[3] AND NOT
[4] OR NOT
[5] NOT AND
[6] NOT OR
[7] NOT AND
NOT
[8] NOT OR
NOT
02/2016 All rights reserved.
Function:
false if it is started by an action (that is, [29] Start
timer 1) and until the given timer value has elapsed.
Function:
selected logic rule.
See parameter LC-01 Start Event ([0] - [61]) and
parameter LC-02 Stop Event ([70] - [75]) for further
description.
Function:
st
Select the 1 logical operator to use on the
boolean inputs from parameter LC-40 Logic
Rule Boolean 1 and parameter LC-42 Logic Rule
Boolean 2.
Parameter numbers in square brackets stand
for the boolean inputs of parameters in LC-##
Logic Controller .
Ignores:
•
Parameter LC-42 Logic Rule Boolean 2.
•
Parameter LC-43 Logic Rule Operator
2.
•
Parameter LC-44 Logic Rule Boolean 3.
Evaluates the expression [LC-40] AND [LC-42].
Evaluates the expression [LC-40] OR [LC-42].
Evaluates the expression [LC-40] AND NOT
[LC-42].
Evaluates the expression [LC-40] OR NOT
[LC-42].
Evaluates the expression NOT [LC-40] AND
[LC-42].
Evaluates the expression NOT [LC-40] OR
[LC-42].
Evaluates the expression NOT [LC-40] AND
NOT [LC-42].
Evaluates the expression NOT [LC-40] OR NOT
[LC-42].
DET-618D