GE AF-650 GP Programming Manual page 128

Parameter Descriptions
ID-76 Option in Slot C2
Range: Function:
0 [0 - 30] Shows the model number string for the option in
*
slot C1 (CXXXX if no option) and the translation,
that is No option.
ID-77 Slot C1 Option SW Version
Range: Function:
0 [0 - 20] Shows the software version for the installed option
*
in option slot C.
ID-80 Fan Running Hours
Range: Function:
0 h [0 - 2147483647 View how many hours the heat sink
*
h] fan has run (increments for each hour).
The value is saved when the frequency
converter is turned off.
ID-81 Preset Fan Running Hours
Range: Function:
0 h [0 - 99999 Enter value to preset the fan running hours
*
h] counter, see parameter ID-80 Fan Running
Hours.
This parameter cannot be selected via the
serial port, RS485.
3.17.7 ID-9# Parameter Info
Parameters to view defined parameters and modified
parameters.
ID-92 Defined Parameters
Range: Function:
0 [0 - 9999] View a list of all defined parameters in the
*
frequency converter. The list ends with 0.
ID-93 Modified Parameters
Range: Function:
0 [0 - 9999] View a list of the parameters that have been
*
changed from their default setting. The list ends
with 0. Changes may not be visible until up to
30 s after implementation.
ID-98 Drive Identification
Range: Function:
0 [0 - 40] This parameter contains data that is used by the
*
DCT-10.
ID-99 Parameter Metadata
Range: Function:
0 [0 - 9999] This parameter contains data used by the DCT10
*
software tool.
DET-618D
AF-650 GP™ Programming Guide
02/2016 All rights reserved.
3 3
127