Ethernet - GE AF-650 GP Programming Manual

Parameter Descriptions
3.13 EN-## Ethernet
The parameters in this group are common for Ethernet IP,
Modbus TCP, and PROFInet RT.
EN-00 IP Address Assignment
3 3
Option:
[0] Manual Set the IP-address in parameter EN-01 IP Address IP
*
[1] DHCP
[2] BOOTP IP-address is assigned via BOOTP server.
EN-01 IP Address
Range:
0 [0 - 4294967295] Configure the IP address of the option.
*
EN-02 Subnet Mask
Range:
0 [0 - 4244635647] Configure the IP subnet mask of the
*
EN-03 Default Gateway
Range:
0 [0 - 2147483647] Configure the IP subnet mask of the
*
EN-04 DHCP Server
Range:
0 [0 - 2147483647]
*
EN-05 Lease Expires
Range:
0
*
Size related
*
EN-06 Name Servers
Range:
0 [0 - 2147483647] IP addresses of domain name servers. Can
*
116
Function:
Selects the IP Address assignment method.
Address.
IP-address is assigned via DHCP server.
Function:
Read-only if parameter EN-00 IP Address
Assignment is set to DHCP or BOOTP.
Function:
option. Read-only if parameter EN-00 IP
Address Assignment is set to DHCP or
BOOTP.
Function:
option. Read-only if parameter EN-00 IP
Address Assignment is set to DHCP or
BOOTP.
Function:
NOTICE
A power-cycle is necessary after
setting the IP parameters manually.
Read only. Displays the IP address of the
found DHCP or BOOTP server.
Function:
[0 - 0] Read only. Shows the lease-time left for
the current DHCP-assigned IP address.
[ 0 - 0]
Function:
be automatically assigned when using
DHCP.
EN-07 Domain Name
Range:
0 [0 - 48] Domain name of the attached network. Can be
EN-08 Host Name
Range:
Blank [0-19 characters]
EN-09 Physical Address
Range:
0 [0 - 17] Read-only. Shows the physical (MAC) address of the
*
3.13.1 EN-1# Ethernet Link Parameters
Applies for the whole parameter group.
Index [0] is used for port 1, and index [1] is used for port
2.
EN-10 Link Status
Option:
[0] No Link
*
[1] Link
EN-11 Link Duration
Range:
0 [0 - 0] Read-only. Shows the duration of the present link
*
EN-12 Auto Negotiation
Option: Function:
Configures Auto Negotiation of Ethernet link
parameters, for each port: ON or OFF.
[0] Off Link Speed and Link Duplex can be configured in
parameter EN-13 Link Speed and parameter EN-14 Link
Duplex.
[1] On
EN-13 Link Speed
Option:
[0] None
*
[1] 10 Mbps
[2] 100
Mbps
02/2016 All rights reserved.
Function:
automatically assigned when using DHCP network.
Function:
Logical (given) name of option.
Function:
option.
Function:
Read-only. Shows the link status of the Ethernet
ports.
Function:
on each port in dd:hh:mm:ss.
Function:
Forces the link speed for each port in 10 or 100
Mbps. If parameter EN-12 Auto Negotiation is set
to [1] ON, this parameter is read-only and
displays the actual link speed. None is displayed
if no link is present.
DET-618D