GE AF-650 GP Programming Manual page 138

Parameter Descriptions
LC-02 Stop Event
Select the boolean (true or false) input to deactivate Logic
Controller.
Option: Function:
[43] Ok key [OK] is pressed. Only available on
the graphical LCP.
[44] Reset key [Reset] is pressed. Only available on
the graphical LCP.
[45] Left key [◄] is pressed. Only available on the
graphical LCP.
[46] Right key [►] is pressed. Only available on the
graphical LCP.
▲
[47] Up key
[
graphical LCP.
▼
[48] Down key
[
graphical LCP.
[50] Comparator 4
[51] Comparator 5
[60] Logic rule 4
[61] Logic rule 5
[70] Logic Controller Logic Controller timer 3 is timed
Time-out 3 out.
[71] Logic Controller Logic Controller timer 4 is timed
Time-out 4 out.
[72] Logic Controller Logic Controller timer 5 is timed
Time-out 5 out.
[73] Logic Controller Logic Controller timer 6 is timed
Time-out 6 out.
[74] Logic Controller Logic Controller timer 7 is timed
Time-out 7 out.
[75] Start command
given
[76] Digital input x30 2
[77] Digital input x30 3
[78] Digital input x30 4
[90] ATEX OL cur. Available, if
warning parameter F-10 Electronic Overload is
set to [20] ATEX ETR or [21]
Advanced ETR. If the alarm 164, ATEX
ETR cur.lim.alarm is active, the
output is 1.
[91] ATEX OL cur. alarm Available, if
parameter F-10 Electronic Overload is
set to [20] ATEX ETR or [21]
Advanced ETR. If alarm 166, ATEX
ETR freq.lim.alarm is active, the
output is 1.
[92] ATEX OL freq. Available, if
warning parameter F-10 Electronic Overload is
set to [20] ATEX ETR or [21]
Advanced ETR. If alarm 163, ATEX
DET-618D
AF-650 GP™ Programming Guide
] is pressed. Only available on the
] is pressed. Only available on the
02/2016 All rights reserved.
LC-02 Stop Event
Select the boolean (true or false) input to deactivate Logic
Controller.
Option: Function:
ETR cur.lim.warning is active, the
output is 1.
[93] ATEX OL freq. alarm Available, if
parameter F-10 Electronic Overload is
set to [20] ATEX ETR or [21]
Advanced ETR. If warning 165, ATEX
ETR freq.lim.warning is active, the
output is 1.
[94] RS Flipflop 0 See chapter 3.20.2 LC-1#
Comparators.
[95] RS Flipflop 1 See chapter 3.20.2 LC-1#
Comparators.
[96] RS Flipflop 2 See chapter 3.20.2 LC-1#
Comparators.
[97] RS Flipflop 3 See chapter 3.20.2 LC-1#
Comparators.
[98] RS Flipflop 4 See chapter 3.20.2 LC-1#
Comparators.
[99] RS Flipflop 5 See chapter 3.20.2 LC-1#
Comparators.
[100] RS Flipflop 6 See chapter 3.20.2 LC-1#
Comparators.
[101] RS Flipflop 7 See chapter 3.20.2 LC-1#
Comparators.
[102] Relay 1
[103] Relay 2
[108] Relay 7 X34/Relay Option OPCRLY
[109] Relay 8 X34/Relay Option OPCRLY
[110] Relay 9 X34/Relay Option OPCRLY
LC-03 Reset Logic Controller
Option: Function:
[0] Do not reset Logic Retains programmed settings in LC-
*
Controller ## Logic Controller .
[1] Reset Logic Resets all parameters in LC-## Logic
Controller Controller to default settings.
3.20.2 LC-1# Comparators
Parameters to configure the Logic Controller (LC)
comparators. Comparators are used for comparing
variables with fixed preset values.
3 3
137