GE AF-650 GP Programming Manual page 134

Parameter Descriptions
DR-86 Drive Port REF 1
Range: Function:
0 [-200 - View the 2-byte status word (STW) sent to the
*
200] fieldbus master. Interpretation of the status word
depends on the network option installed and the
control word profile selected in
parameter O-10 Control Word Profile.
DR-87 Bus Readout Alarm/Warning
Range: Function:
0 [0 - 65535] Alarm and warning numbers in hex as showed
*
in the alarm log. The high byte contains the
alarm, the low byte the warning. The alarm
number is the first one that occurred after the
last reset.
DR-89 Configurable Alarm/Warning Word
Range: Function:
0 [0 - 65535] This alarm/warning word is configured in
*
parameter O-17 Configurable Alarm and
Warningword to match the actual requirements.
3.18.7 DR-9# Diagnosis Readout
Parameters to view the alarms, warnings, and extended
status words.
DR-90 Alarm Word
Range: Function:
0 [0 - 4294967295] View the alarm word sent via the serial
*
communication port in hex code.
DR-91 Alarm Word 2
Range: Function:
0 [0 - 4294967295] View the alarm word sent via the serial
*
communication port in hex code.
DR-92 Warning Word
Range: Function:
0 [0 - 4294967295] View the warning word sent via the serial
*
communication port in hex code.
DR-93 Warning Word 2
Range: Function:
0 [0 - 4294967295] View the warning word sent via the serial
*
communication port in hex code.
DR-94 Ext. Status Word
Range: Function:
0 [0 - 4294967295] Returns the extended warning word sent
*
via the serial communication port in hex
code.
DET-618D
AF-650 GP™ Programming Guide
DR-95 Ext. Status Word 2
Range:
0 [0 - 4294967295] Shows the extended status word 2 sent
*
02/2016 All rights reserved.
Function:
via the serial communication port in hex
code.
3 3
133