GE AF-650 GP Programming Manual page 110

Parameter Descriptions
DN-12 Process Data Config Read
Select the process read data for I/O assembly instances 101/151.
Elements [2] and [3] of this array can be selected. Elements [0]
and [1] of the array are fixed.
Option:
[1294] Ext. Status Word
[1295] Ext. Status Word 2
[1340] Analog Input X49/1
[1341] Analog Input X49/3
[1342] Analog Input X49/5
[1343] Analog Out X49/7
[1344] Analog Out X49/9
[1345] Analog Out X49/11
[1346] X49 Digital Output [bin]
[1500] Operating hours
[1501] Running Hours
[1502] kWh Counter
DN-13 Warning Parameter
Range: Function:
0 [0 - View a DeviceNet-specific Warning word. One bit
*
65535] is assigned to every warning. Please refer to the
DeviceNet Operating Instructions for further
information.
Bit Meaning
0 not active
1 Explicit connection timeout
2 I/O connection
3 Retry limit reached
4 Actual is not updated
5 CAN bus off
6 I/O send error
7 Initialization error
8 No bus supply
9 Bus off
10 Error passive
11 Error warning
12 Duplicate MAC ID Error
13 RX queue overrun
14 TX queue overrun
15 CAN overrun
Table 3.21
DN-14 Net Reference
Read only from keypad.
Option: Function:
Select the reference source in instances 21/71 and
20/70.
[0] Off Enables reference via analog/digital inputs.
*
[1] On Enables reference via the network.
DET-618D
AF-650 GP™ Programming Guide
DN-15 Net Control
Read only from keypad.
Option: Function:
Function:
[0] Off Enables control via analog/digital inputs.
*
[1] On Enable control via the network.
3.11.3 DN-2# COS Filters
Parameters to configure the filtering of Change of State
data.
DN-20 COS Filter 1
Range:
0 [0 - 65535] Enter the value for COS Filter 1 to set up the
*
DN-21 COS Filter 2
Range:
0 [0 -
*
65535]
DN-22 COS Filter 3
Range:
0 [0 - 65535] Enter the value for COS Filter 3, to set up the
*
DN-23 COS Filter 4
Range:
0 [0 - 65535] Enter the value for COS Filter 4 to set up the
*
3.11.4 DN-3# Parameter Access
Parameters to configure the acces to indexed parameters
and defining programming set-up.
DN-30 Array Index
Range:
0 [0 - 255] View array parameters. This parameter is valid only
*
02/2016 All rights reserved.
Select the control source in instances 21/71 and 20/70.
Function:
filter mask for the Status Word. When operating
in COS (Change-Of-State), this function filters
out bits in the Status Word that should not be
sent if they change.
Function:
Enter the value for COS Filter 2, to set up the
filter mask for the Main Actual Value. When
operating in COS (Change-Of-State), this
function filters out bits in the Main Actual Value
that should not be sent if they change.
Function:
filter mask for PCD 3. When operating in COS
(Change-Of-State), this function filters out bits
in PCD 3 that should not be sent if they
change.
Function:
filter mask for PCD 4. When operating in COS
(Change-Of-State), this function filters out bits
in PCD 4 that should not be sent if they
change.
Function:
when a DeviceNet fieldbus is installed.
3 3
109