Technical Specifications - Teledyne Foxy R1 Instruction Manual

® ®
Foxy R1 and Foxy R2 Fraction Collectors
Section 1 Introduction
1.4 Technical
Specifications
1-6
Table 1-2 lists the fraction collector technical specifications.
Table 1-2 Specifications
Dimensions: Foxy R1 (PN 68-3870-010):
(width, depth, height) 12.25, 13.0, 14.0 in. (31.1, 33.0, 35.5 cm)
Foxy R2 (PN 68-2130-006):
12.25, 21.0, 14.9 in. (31.1, 53.3, 37.8 cm)
Foxy R2 High Flow (PN 68-2130-007):
12.25, 21.0, 15.5 in. (31.1, 53.3, 39.4 cm)
Weight: Foxy R1: 15.6 lbs. (7.1 kg)
(with drip tray, no tube Foxy R2: 22.8 lbs. (10.3 kg)
rack) Foxy R2 High Flow: 22.9 lbs. (10.4 kg)
13 mm diameter tubes (144/rack)
Available Racks:
16 mm diameter tubes (100/rack)
18 mm diameter tubes (72/rack)
25 mm diameter tubes (36/rack)
1.5 mL microcentrifuge tubes (60/rack)
50 mL centrifuge tubes (36/rack)
28 mm diameter scintillation vials (36/rack)
96-well microplates (R1 rack holds 2 plates;
480 mL bottles
Funnel racks for fractions larger than 480 mL
Maximum Tube Height: Foxy R1: 160 mm
Foxy R2: 196 mm
Foxy R2 High Flow: 180 mm
Maximum Flow Rate: Foxy R1 (68-3870-012):
Standard flow rate of 25 mL/min (through
I.D. tubing). Optional accessory package
60-2139-032 extends maximum flow rate to
125 mL/min (through
Foxy R2 (68-2130-007):
Standard maximum flow rate of 125 mL/min
(through
package 60-2139-031 reduces flow rate to
25 mL/min (through
Foxy R2 with high flow diverter valve
(68-2130-007): 1000 mL/min
Delay Volume: Drop former located beneath diverter valve for µL
delay volume. Compensation only required for
length of tubing to the diverter valve.
a
R2 rack holds 6 plates)
b
1
/
inch I.D. tubing).
8
1
/
inch I.D. tubing). Optional accessory
8
1
/
inch I.D. tubing).
16
1
/
inch
16