Problem Responses - Teledyne Foxy R1 Instruction Manual

4.5.4 Problem Responses

Foxy
The fraction collector will respond with a PROBLEM=<type>
message should the command fail. The following types may be
reported.
IMPROPER MODE
while a run is in progress.
Note
RUN and STOP cannot be executed while in manual control.
INVALID COMMAND
this response:
• An unknown command has been entered, usually a
typographical error.
• An operand has been sent for a command that does not
require one.
• An operand is missing for a command that requires one.
INVALID OPERAND
unsupported.
LOCAL MODE The unit must be in the remote mode to do
anything other than read values.
® ®
R1 and Foxy R2 Fraction Collectors
Section 4 Serial Command Control
The program values cannot be changed
One of three situations could cause
The operand value is out of range or
4-17