Main Menu - Teledyne Foxy R1 Instruction Manual

® ®
Foxy R1 and Foxy R2 Fraction Collectors
Section 3 Programming

3.1 Main Menu

Figure 3-1 Main Menu
3-2
All programming via the touch screen begins at the Main Menu
(Figure 3-1).
Configuration Tools
Collect in Tubes
Tube Position
Play (start method)
Access the fraction collector programming by touching either the
Tools icon or the Folder icon:
Touch the Configuration Tools icon to view or
modify the fraction collector Configuration set-
tings such as the rack type, input/output settings,
etc. The Configuration settings should be reviewed and set
as required when the fraction collector is first installed,
and whenever the configuration is changed thereafter.
Refer to Section 3.2 for details.
Touch the Folder icon to view or modify the
Method settings. The Method settings direct the
operation of the fraction collector after you touch
the Play icon. These settings define tube change intervals,
peak cutting, time windows, etc. Up to eight different
methods can be defined, one of which is always current. For
more details see Section 3.3.
The other Main Menu icons are briefly discussed below:
Touch the Diverter Valve Position icons to toggle
the position of the diverter valve. When the
arrow points to the tube, the valve is set to col-
lect fluids in tubes. When the arrow points to the waste
can, the valve is set to route fluids to waste.
Touch the Next Tube icon to advance the drop for-
mer to the next tube position. The current tube
position is reported next to this icon.
Touch the Play icon to start the current method.
Touch the Power icon to place the fraction collector
in the Standby state.
Method Settings
Divert to Waste
Tube Advance
Standby