Basic Operation Of The Sewing Machine - JUKI LBH-1790S Instruction Manual

2. Basic operation of the sewing machine

1) Turn ON the power switch.
When you turn ON the power to the sewing
machine for the first time after the purchase, the
language selection screen A is displayed. Select
the language to be displayed, then press return
key ❾
.
If you terminate the language
selection by pressing return key
❾
language, the language selec-
tion screen will be displayed ev-
ery time you turn ON the power
to the sewing machine.
First, check that presser type B which has been
set is the same as that of the presser actually
mounted. For checking and setting procedures,
refer to "V-4. Input of the presser type"
2) Select the pattern No. you desire to
sew.
When the power is turned ON, the pattern No. C
and pattern data name D are displayed.
When you want to change the pattern number,
press DATA CHANGE key
the number you want to use for sewing.
When you purchase the sewing machine, pattern
No. 1 to 10 described in
ing data" p.35 have been registered. Select
the pattern No. you sesire to sew from among
these numbers. (The No. with which the pattern
has not been registered is not displayed.)
3) Set the sewing machine to sewing possible state.
When READY key ❷
abled.
4) Start sewing.
Set the sewing product to the presser portion, and operate the pedal to start the sewing machine, and
sewing starts. The pedal type of the sewing machine has been factory-set to the 1-pedal type at the time
of shipment. However, the pedal operation method can be selected from among four different ones.
Select the operating procedure you desire and use the sewing machine. → Refer to
the pedal" p.23.
without selecting the
p.25.
❼
and select
"V-11. Changing sew-
is pressed, SET READY LED  lights up to show that the sewing is en-
B C
 ❷
– 22 –
A
❼
D
"V-3. How to use
❾