AT&T MERLIN MAIL System Programming And Maintenance Manual page 85

MERLIN MAIL—ML System Programming
Definitions for Class of Service Key:
Mins (Minutes)—total number of minutes available for storing messages
in the mailbox. For an individual message, the maximum message
length is 2 minutes for Classes of Service 1-14; for Class of Service 16,
it is 15 minutes.
Transfer Type— method of transfer to be used for this Class of Service.
Outcalling—whether Outcalling is permitted; this feature calls a
designated phone number or beeper/pager number when a message
is placed in a subscriber's mailbox.
Coverage Service—type of coverage that this Class of Service supports.
If the MERLIN MAIL—ML system is set for monolingual operation, you are
prompted to enter the mailbox name. Skip to Step 9.
If the MERLIN MAIL—ML system is set for bilingual operation, the system
prompts you to select this subscriber's mailbox language. Go to Step 7.
7. Enter one of the following options:
— [1] to select the primary language as the mailbox language.
— [2] to select the secondary language as the mailbox language.
— [#] to review the current language.
— [*] [#] to quit use the primary language as the mailbox
language. Skip to Step 9.
8. Choose one:
— [*] [#] to approve the language selected. Go to Step 9.
— [1] to re-enter the language selected. Go back to Step 7.
9. Substituting number codes for letters, as shown in the Letter Key that
follows, use the dialpad to enter the mailbox name (up to four letters)
followed by [#]
Programming Voice Mailboxes
3-23