Setting Up The Rmd; Optional System Features; Message-Waiting Receiver - AT&T MERLIN MAIL System Programming And Maintenance Manual

MERLIN LEGEND System Programming

Setting Up the RMD

Follow these procedures to setup the RMD:
1. (Key mode only) Remove all lines from the RMD. To do this, enter
programming mode, Select "Extensions", then "Line Trunks"
and follow the prompts. For Hybrid/PBX mode, skip this step.
2. Restrict the RMD from making outside calls. To do this, enter
programming mode, select "Extensions" then "Restriction"
and follow the prompts. For Restriction Type, choose "Outward
Restrict".
For more details on these procedures, refer to the MERLIN LEGEND System
Programming Guide.

Optional System Features

The following features are available for your convenience, but are not required
for the operation of the MERLIN MAIL—ML system.

Message-Waiting Receiver

It is useful to designate an extension as a message-waiting receiver when
calls are transferred to a Calling Group. The message-indicator lights on the
designated extension whenever a caller leaves a message for the Calling
Group.
Use MERLIN LEGEND Form 6e to identify the Message-Waiting
Receiver extension number.
Only one telephone can be designated as the Message-Waiting
Receiver.
More than one Calling Group can have the same
Message-Waiting Receiver if the Message-Waiting
display set.
Receiver is a
Optional System Features 4-33