AT&T MERLIN MAIL System Programming And Maintenance Manual page 127

MERLIN MAIL—ML System Programming
8. Select one of the following options:
To
Assign Selector Code Action 1,
Selector Code Transfer, to this
Selector Code
Assign Selector Code Action 2,
Play Submenu, to this Selector
Code
Assign Selector Code Action 3,
Play Announcement, to this
Selector Code
Assign Selector Code Action 4,
Prompted Transfer, to this
Selector Code
Assign Selector Code Action 5,
Direct Extension Transfer, to this
Selector Code
Delete this Selector Code
The system prompts you to enter a Selector Code.
9. Repeat Steps 7 and 8 for each Selector Code to be added to this submenu.
10. [*][#] once all the Selector Codes have been added to this submenu.
The system prompts you to record the submenu script at the tone.
Programming the Automated Attendant Menus
Enter the Following
[1] then enter the extension
number and [#] in response to the
prompt.
[2] then enter a submenu number
and [#] in response to the prompt.
[3] then enter the announcement
number and [#] in response to the
prompt.
[4]
[5]
[*][D] (or [*][3] ) then when
prompted, enter [9] to confirm the
deletion or [6] to cancel the
deletion.
3-65