AT&T MERLIN MAIL System Programming And Maintenance Manual page 142

MERLIN LEGEND System Programming
RECOMMENDATION:
Set the VMS Transfer Return Interval equal to the Transfer Return Interval.
If all stations are covered only by the MERLIN MAIL—ML system, the
VMS Transfer Return Interval should be set to a value greater than the
Coverage Delay. If any station has personal coverage and group
coverage by the MERLIN MAIL—ML system, set the VMS Transfer
Return Interval to a value greater than the sum of the Coverage Delay
and Delay Ring intervals.
The VMS Transfer Return Interval does not appear on a MERLIN
LEGEND Form.
The factory setting is 4 rings.
Step Instruction
1 . Enter programming mode.
2. Select Auxiliary Equipment.
3. Select Voice Messaging
System/Automated
Attendant.
4. Select Transfer Return.
5. Erase current number of rings.
6. Enter number of rings before
calls are returned from
transfer.
7. To return to previous menu.
4-6
Group-Assigned Features
MLX-20L
[Menu]
Sys Program
Exit
AuxEquip
VMS/AA
TransferRtn
[Drop]
[n]
Enter
Exit
PC
[S][P][M]
[Enter]
[any key]
[F1]
[F5]
[F9]
[F6]
[F1]
[Alt] + [P]
[n]
[F10]
[F5]