AT&T MERLIN MAIL System Programming And Maintenance Manual page 167

MERLIN LEGEND System Programming
Programming a Night Service
Coverage Receiver
To program Night Only Call Handling, you program the MERLIN MAIL—ML
Calling Group as the Night Service coverage receiver. Night Service calls will
be sent to the MERLIN MAIL—ML system, and Automated Attendant Service
will answer the call.
NOTE:
Use these procedures for MERLIN LEGEND Release 2.0 or later. For
previous releases, see Appendix B.
If you want calls to ring at other extensions for Night Service, assign cover
buttons for the Night Service receiver at those extensions. See the MERLIN
LEGEND System Programming Guide.
Use MERLIN LEGEND Form 7a: Group Assignment to determine
the Night Service operator extension and the extension number
for the MERLIN MAIL—ML Calling Group.
Step Instruction
1 . Enter programming mode.
2. Select Night Service.
3. Select Group Assign.
4. Select Calling Group.
5. Enter the Night Service
operator extension.
MLX-20L
[Menu]
Sys Program
Exit
NightSrvce
GroupAssign
Calling Grp
[nn]
Enter
Call Handling Methods
PC
[S][P][M]
[Enter]
[any key]
[ F 1 ]
[ F 5 ]
[ F 1 0 ]
[F1]
[F2]
[nn]
[F10]
4-31