AT&T MERLIN MAIL System Programming And Maintenance Manual page 62

Installation
17. Tighten the captive retaining screw on the wall mount and cable
manager bracket into the mounting hole on the lower right side of the
cabinet.
18. Plug in the modular telephone cords from the MERLIN MAIL—ML ports
to the correct MERLIN LEGEND jacks. Be sure to connect the cords
from lowest-numbered port to lowest-numbered jack and
highest-numbered port to highest-numbered jack. Refer to MERLIN
LEGEND System Form 2a: System Numbering—Station Jacks for jack
assignments.
19. Reconnect the modem cable to the COM1 port.
Plug in the MERLIN MAIL—ML unit power cord.
20.
21.
Switch the MERLIN MAIL—ML unit power on.
22. If the unit has been previously programmed, perform the Acceptance
Tests in Chapter 5.
2-20
Adding or Replacing a Voice-Processing Card