Merlin Mail-Ml System Configurations - AT&T MERLIN MAIL System Programming And Maintenance Manual

Overview
If the MERLIN MAIL—ML system has been setup for bilingual
operation, callers hear the subscriber's personal greeting in the
language administered for the voice mailbox. Callers can choose to
hear the personal greeting and all other prompts in the alternate
(secondary) language by pressing [*] [1]
Guest Mailboxes
You can set up Guest Mailboxes so that Voice Mail users who do not have
their own extension, such as temporary workers, contract workers, and
consultants, can receive messages from subscribers and non-subscribers.
MERLIN MAIL—ML System
Configurations
The MERLIN MAIL—ML system is available in two configurations: the two-port
configuration uses a single voice processing card and the four-port
configuration uses two voice processing cards. The ports of a voice
processing card connect to a Basic Telephone (012) Module in the MERLIN
LEGEND system. Each MERLIN MAIL—ML port can support multiple services:
Automated Attendant Service, Call Answer Service, and Voice Mail Service.
Either MERLIN MAIL—ML configuration can store approximately four hours of
messages.
The MERLIN MAIL—ML system can be upgraded from a two-port system to a
four-port system. Contact your AT&T representative or authorized dealer for
more information.
A separate Remote Maintenance Device (RMD) is included with the MERLIN
MAIL—ML unit. This device is used for remote maintenance and diagnostic
services by AT&T or authorized service personnel. The RMD is connected to a
port on a Basic Telephone (012) Module.
MERLIN MAIL—ML System Configurations
1-21