AT&T MERLIN MAIL System Programming And Maintenance Manual page 83

MERLIN MAIL—ML System Programming
To program voice mailboxes, follow the instructions below:
1. Log in to the MERLIN MAIL—ML system as the system administrator.
The system administrator's name plays; then the Voice Mail Activity Menu
plays.
2. [9] to program the system.
The System Administration Menu plays.
[4] for Mailbox programming.
3.
The Mailbox Administration Menu plays.
4.
[4] to create a new mailbox.
The system prompts you to enter the mailbox number.
5. Enter the mailbox number followed by [#]
The system prompts you to enter the Class of Service (COS).
6. Enter the Class of Service, followed by [#]
If necessary, review the information in the Class of Service Key that
follows. This key defines the characteristics for each Class of Service.
The system default is 1.
Programming Voice Mailboxes
3-21