Connecting The Modem Using The Cli; Connecting The Modem Using The Nncli; Setting The System Date And Time Using The Cli; Setting The System Date And Time Using The Nncli - Nortel NN46205-310 Quick Start Manual

22 New in this release

Connecting the modem using the CLI

This section describes how to connect a modem to the modem port on
an SF/CPU module using the CLI command. You can access the CLI
through a modem connection to the Ethernet Routing Switch 8690SF,
8691SF/CPU, or 8692SF/CPU modules.
For more information, see

Connecting the modem using the NNCLI

This section describes how to connect a modem to the modem port on an
SF/CPU module using the NNCLI command. You can access the NNCLI
through a modem connection to the Ethernet Routing Switch 8690SF,
8691SF/CPU, or 8692SF/CPU modules.
For more information, see
56).

Setting the system date and time using the CLI

This section describes the instructions to set the system date and time
using the CLI.
For more information, see
(page

Setting the system date and time using the NNCLI

This section describes the instructions to set the system date and time
using the NNCLI.
For more information, see
(page

Changing passwords using the CLI

This section describes the instructions to set new passwords for each
access level, or change the logon password for the different switch access
using the CLI.
For more information, see

Changing passwords using the NNCLI

This section describes the instructions to set new passwords for each
access level, or change the logon password for the different switch access
using the NNCLI.
For more information, see
63).
Copyright © 2008 Nortel Networks
.
"Connecting a modem using the CLI" (page
"Connecting a modem using the NNCLI" (page
"Setting system date and time using the CLI"
59).
"Setting system date and time using the NNCLI"
59).
"Connecting a modem using the CLI" (page 53)
"Changing passwords using the NNCLI" (page
Nortel Ethernet Routing Switch 8600
Quick Start
NN46205-310 02.01 Standard
30 May 2008
53).