Table of Contents
Advertisement
Function
Description
X-PRST-TYPES?
Get the types of
presets that the
system supports and
their hierarchy.
X-SIGNAL-PIPE
Set a pipe between
Two outputs. This is
when we want to "tee"
a signal to another
output.
Used essentially into
AFM-20DSP
to output
audio signal to
AMPLIFIED outputs.
This is an
Extended Protocol
3000 command.
X-SIGNAL-
Get a pipe
PIPE?
configuration for an
output port. This is
when we want to "tee"
a signal to another
output.
Used essentially into
AFM-20DSP
to output
audio signal to
AMPLIFIED outputs.
This is an
Extended Protocol
3000 command.
AFM-20DSP – Protocol 3000
Syntax
COMMAND
#X-PRST-TYPES?<CR>
FEEDBACK
~nn@X-PRST-TYPESpreset_type
Internal – for web only.
Internal – for web only.
Parameters/Attributes Example
<CR><LF>
Kramer Electronics Ltd.
▪
–
preset_type
o IOCONFIG – used for I/O
configuration setup presets:
o 1: 4x16
o 2 6x14
o 3: 8x12
o 4: 10x10
o 5: 12x8
o 6: 14x6
o 7: 16x4
o IOCONFIG.SYSTEM – used for
system preset per IOConfig, we
have 10 preset banks per
IOConfig setup, Preset #1 is the
default system preset for this
setup and is READ ONLY,
Preset #2 is used for the first
user system preset, Preset #3 for
the second etc.
IOCONFIG.SYSTEM.MIXER –
o
used for a Mixer snapshot of a
specific system preset per
IOConfig. There are 10 MIXER
snapshots per System presets in
each IOConfig setup, Snapshot
#1 is the default MIXER
snapshot and is READ ONLY.
Snapshot #2 is used for the first
user Mixer snapshot, Snapshot
#3 for the second etc.
Get preset types:
X-PRST-TYPES?<CR>
82
Advertisement
Table of Contents
