Table of Contents
Advertisement
Viewing/Changing Current Analog I/O Configuration and Preset
Name
The center of the menu bar in every webpage shows the analog I/O setup, the preset name
and the status of the setup.
The indication light displays:
• Green if the current preset unmodified.
• Yellow if the current preset has been
modified.
To save a modified preset (yellow indication light):
1. Click the preset status area. The A/V settings page appears (see
2. Follow the instructions in
Changing Security Settings
You can easily disable or enable the webpages security using the lock icon. When security is
disabled, you do not need to enter a password to access the webpages. When security is
enabled, you do. For information about the default login credentials, see
Communication Parameters
credentials, see
Setting Access Security
To disable security settings:
1. Click the lock icon ( ) indicating that security is enabled.
The following message appears:
2. Type the current password (Admin, by default).
3. Click Save.
Security is disabled.
To enable security settings:
•
Click the security disabled icon (
AFM-20DSP – Using Embedded Webpages
Figure 14: Analog and/or Preset Status Unmodified
Defining Audio Settings
on page 63. For information about changing the default login
on page 49.
Figure 16: Disabling Security Message
).
Figure 15: Analog and/or Preset Status modified
Figure
on page 45.
Kramer Electronics Ltd.
54).
Default
19
Advertisement
Table of Contents
