Linking Analog Pairs
To link analog input or output pairs, see
Setting Amplifier Outputs
The amplifier left and right outputs can be set via the Matrix page (as well as via the DSP
page, see
Selecting Output Signals to Route to Amplifier
To set amplifier outputs:
1. In the Navigation pane, click Matrix. The Matrix page appears.
2. Click AMP (on the lower right side of the page). The AMP page appears, displaying all
the available outputs.
3. Select an output to route to Amp 1 (amplifier left side) and to Amp 2 (amplifier right side).
the button lights green.
Amplifier outputs are defined.
AFM-20DSP – Processing Audio Signals
Linking Analog Inputs and Outputs
Figure 46: AMP View
Figure 47: Selecting Outputs to Amplifier
Kramer Electronics Ltd.
on page 23.
on page 22).
40