Enabling Security
To enable security:
1. In the Navigation pane, click Settings. The General Settings tab appears, displaying the
Security area.
2. Click On. The full security page appears (see
Security is enabled. The security-enabled icon appears (
Changing the Password
To change the password:
1. In the Navigation pane, click Settings. The Settings page appears, displaying the
Security area (see
2. Enable security (if disabled).
3. Enter current password and new password as required.
AFM-20DSP – Defining Settings
Figure 61: General Settings Tab – Enabling Security
Figure
59).
Figure 62: General Settings Tab – Changing the Password
Figure
59).
).
Kramer Electronics Ltd.
51