Kramer AFM-20DSP User Manual page 76

Function Description
X-LABEL Set the port label.
This is an Extended
Protocol 3000
command.
X-LABEL?
Get the port label.
This is an Extended
Protocol 3000
command.
X-LINK-GROUP SET LINK-MODE
feature:
Get linked signals
groups info, this is a
way to define group of
signals for which any
action made on one of
them will be applied to
all the members of the
group.
This is an
Extended Protocol
3000 command.
X-LINK-GROUP? GET LINK-MODE
feature:
Get linked signals
groups info, this is a
way to define group of
signals for which any
action made on one of
them will be applied to
all the members of the
group.
This is an
Extended Protocol
3000 command.
Used essentially by the
web command.
X-LINK-
LINK-MODE feature:
GROUPS-LIST?
Get linked signals
groups info, this is a
way to define group of
signals for which any
action made on one of
them will be applied to
all member of the
group.
The LINK mode of a
group is defined using
the command: X-
LINK-GROUP
This is an
Extended Protocol
3000 command.
Used essentially by the
web
AFM-20DSP – Protocol 3000
Syntax
COMMAND
#X-LABEL<direction_type>.<port_type>.<port_index>,label
_text<CR>
FEEDBACK
~nn@X-LABEL<direction_type>.<port_type>.<port_index,lab
el_text<CR><LF>
COMMAND
#X-LABEL?<direction_type>.<port_type>.<port_index>.<sig
nal_type>.<index><CR>
FEEDBACK
~nn@X-LABEL?<direction_type>.<port_type>.<label_text><C
R><LF>
COMMAND
#X-GROUP<direction_type>.<group_type>.<group_index>,lin
ked_state<CR>
FEEDBACK
~nn@X-GROUP<direction_type>.<group_type>.<group_index>,
linked_status<CR><LF>
COMMAND
#X-GROUP?<direction_type>.<group_type>.<group_index><CR
>
FEEDBACK
~nn@X-GROUP<direction_type>.<group_type>.<group_index>,
state<CR><LF>
COMMAND
#X-LINK-GROUPS-LIST?<CR>
FEEDBACK
~nn@X-POE[[group_id,is_linked,[signal_id,...,signal_id]
]<CR><LF>
Kramer Electronics Ltd.
Parameters/Attributes Example
The following attributes comprise the
signal ID:
▪ –
<direction_type>
o IN
o OUT
–
▪ <port_type>
o HDMI
o ANALOG_AUDIO
o AMPLIFIED_AUDIO
o SPDIF
o DANTE
o MIC
▪ <port_index> – The port number
as printed on the front or rear
panel
▪ <signal_type> –
o AUDIO
▪ <label_text> – Enter label text
The following attributes comprise the
signal ID:
▪ –
<direction_type>
o IN
o OUT
▪ –
<port_type>
o HDMI
o ANALOG_AUDIO
o AMPLIFIED_AUDIO
o SPDIF
o MIC
▪ <port_index> – The port number
as printed on the front or rear
panel
▪ <signal_type> –
o AUDIO
▪ <index> – Indicates a specific
channel number when there are
multiple channels of the same type
▪ <label_text> – Enter label text
The following attributes comprise the
group ID (all Caps – case sensitive):
▪ –
<direction_type>
o IN
o OUT
▪ –
<group_type>
o ANALOG_AUDIO
– The group index
▪ <group_index>
(1,3,5,7,9,11,13,15,17 or 19)
– OFF/ON (not
o Linked_state
case sensitive)
The following attributes comprise the
group ID (all Caps – case sensitive):
▪ –
<direction_type>
o IN
o OUT
–
▪ <group_type>
o ANALOG_AUDIO
▪ <group_index> – The group index
(1,3,5,7,9,11,13,15,17 or 19)
Linked_state – OFF/ON (not case
sensitive)
– The following attributes
group_id
comprise the port ID:
▪ <direction_type> –
o IN
o OUT
▪ <group_type> –
o AUDIO
▪ – The port
<group_index>
number as printed on the front or
rear panel
▪ – OFF/ON (not case
<is_linked>
sensitive)
– also includes:
signal_id
▪ –
<signal_type>
o ANALOG_AUDIO
– 1
▪ <index>
▪ – OFF/ON (not case
state
sensitive)
Set the analog input label to
Port1:
#X-LABELIN.ANALOG_AUDI
O.1.AUDIO,Port1<CR>
Get the analog input:
#X-LABEL?IN.ANALOG_AUD
IO.1.AUDIO.1<CR>
Set the selected id of
selectable ports groups of all
available groups
Set the link for group 7 (analog
inputs 7 and 8) to off:
#X-LINK-GROUPIN.ANALOG
_AUDIO.7,OFF<CR>
Get the groups link status:
#X-LINK-GROUP?
IN.ANALOG_AUDIO.1<CR>
Get the PoE state for all ports:
#X-LINK-GROUPS-
LIST?<CR>
74