Table of Contents
Advertisement
Setting Cross-Point Volume
Set the cross-point volume separately for each in-out connection.
To set the cross-point volume:
1. In the Navigation pane, click Matrix. The Matrix page appears.
2. Click the volume area (0dB, by default).
The volume window appears.
3. Set the cross-point volume (using the knob or entering the value and pressing Enter on
your keyboard). The cross-point volume is set and appears at the cross-point.
AFM-20DSP – Processing Audio Signals
Figure 44: Matrix Page – Setting Cross-Point Volume
Figure 45: Cross-Point Volume Value
Kramer Electronics Ltd.
39
Advertisement
Table of Contents
