Table of Contents
Advertisement
6. Select the sensitivity from Very High to Very Low.
7. Toggle Recycle Enabled / Disabled to enable / disable the filters.
AFS parameters are adjusted.
Using Compression Module
Use the Compressor module to reduce the signal dynamic range which is the difference
between the loudest and quieter sounds (for example, the difference between a scream and a
whisper), making the sound seem more natural.
To adjust the compressor settings:
1. In the Navigation pane, click DSP. The DSP (Main) page appears.
2. Click Comp.
The button turns blue and the Compressor module pane appears.
3. Click the Off button
AFM-20DSP – Processing Audio Signals
Figure 32: AFS Module – Defining AFS Parameters
. The Comp module turns on
Figure 33: Processing View – Compressor Module
Kramer Electronics Ltd.
.
31
Advertisement
Table of Contents
