Table of Contents
Advertisement
1 - Bolt
❑ 10 Nm
2 - Upper part of intake mani‐
fold
❑ Removing and installing
⇒ page 181
3 - Bolt
❑ 10 Nm
4 - Sealing grommet
❑ Renew if damaged
5 - To brake servo
6 - From activated charcoal fil‐
ter system solenoid valve 1 -
N80-
7 - Rear intake manifold sup‐
port
8 - Bolt
❑ 20 Nm
9 - Bolt
❑ 7 Nm
10 - Throttle valve module -
J338-
❑ Including throttle valve
drive (electric throttle
operation) - G186- , an‐
gle sender 1 for throttle
valve drive (electric
throttle operation) -
G187- and angle sender
2 for throttle valve drive
(electric throttle opera‐
tion) - G188- .
❑ If renewed, adapt engine control unit to throttle valve module ⇒ Vehicle diagnostic tester "Guided Func‐
tions".
❑ Removing and installing
11 - Sealing ring
❑ Renew
12 - Bolt
❑ 3.5 Nm
13 - Connection
❑ For crankcase ventilation.
❑ With heater element for crankcase breather - N79-
❑ From cylinder head cover
14 - Sealing ring
❑ Renew
15 - Front intake manifold support
16 - Seal
❑ Renew if damaged
❑ Before installing, lightly moisten with clean engine oil and insert into upper part of intake manifold.
17 - Seal
❑ Renew
CC 2012 ➤ , Passat 2011 ➤ , Passat Variant 2011 ➤
6-cylinder direct-injection engine (3.6 l engine, 4V) - Edition 06.2019
⇒ page 184
177
4. Intake manifold
Advertisement
Table of Contents
