Table of Contents
Advertisement
CC 2012 ➤ , Passat 2011 ➤ , Passat Variant 2011 ➤
6-cylinder direct-injection engine (3.6 l engine, 4V) - Edition 06.2019
Not illustrated:
♦ Sealant - D 176 501 A1-
Removing:
– Remove air filter housing
– Remove upper part of intake manifold
– Remove cylinder head cover
– Removing the two camshaft adjusters
– Undo bolts -arrows- from valve timing housing and pull valve
timing housing off cylinder head.
– Lay camshaft timing chain aside.
A - Inlet camshaft
– First remove bearing caps 1 and 13.
– Remove bearing caps 3 and 11.
– Remove bearing cap 7.
– Loosen bearing caps 5 and 9 alternately and diagonally.
B - Exhaust camshaft
– First remove bearing caps 2 and 14.
– Remove bearing caps 4 and 12.
– Remove bearing cap 8.
– Loosen bearing caps 6 and 10 alternately and diagonally.
Continuation for both camshafts
– Carefully remove camshafts and lay aside on clean surface.
– Remove roller rocker fingers together with supporting ele‐
ments and place them on a clean surface.
– Ensure that roller rocker fingers and supporting elements are
not interchanged.
Installing:
Conditions:
102
Rep. gr.15 - Cylinder head, valve gear
⇒ page 174
.
⇒ page 181
⇒ page 68
.
⇒ page 105
.
.
Advertisement
Table of Contents
