Table of Contents
Advertisement
CC 2012 ➤ , Passat 2011 ➤ , Passat Variant 2011 ➤
6-cylinder direct-injection engine (3.6 l engine, 4V) - Edition 06.2019
3
Exhaust manifold
⇒ "3.1 Assembly overview - exhaust manifold", page 210
⇒ "3.2 Removing and installing exhaust manifold", page 211
3.1
Assembly overview - exhaust manifold
Note
After working on the exhaust system, ensure that the system
♦
has sufficient clearance to the bodywork. If necessary, loosen
double clamp on front exhaust pipe and realign silencer and
exhaust pipes.
Do not use sealants containing silicone. Silicone particles
♦
drawn into the engine will not be burnt in the engine and will
damage the Lambda probes.
Renew self-locking nuts.
♦
1 - Heat shield bracket on the
cylinder head
2 - Bolt
❑ 20 Nm
3 - Bolt
❑ 20 Nm
4 - Seal
❑ Bank 1
❑ Cylinders 1, 2, and 3
❑ Renew
5 - Exhaust manifold
❑ Bank 1
❑ Cylinders 1, 2, and 3
❑ Coat studs with high
temperature paste - G
052 112 A3- .
❑ Removing and installing
⇒ page 211
6 - Nut
❑ Renew
❑ 25 Nm
7 - Heat shield
8 - Bolt
❑ 20 Nm
9 - Intake manifold support
10 - Exhaust manifold
❑ Bank 2
❑ Cylinders 4, 5, and 6
❑ Removing and installing
⇒ page 211
11 - Seal
❑ Bank 2
210
Rep. gr.26 - Exhaust system
Advertisement
Table of Contents
