Installation With Table Stand And Mains Adaptor - oventrop R-Tronic RT B Installation And Operating Instructions Manual

4.4

Installation with table stand and mains adaptor

CAUTION Risk of fire by short circuit!
There is a risk of overcharging of the batteries (types "RT B" and
"RTF B") if the operating unit is equipped with batteries and is
connected to the 230 V network via the table stand.
• The operating unit must never be equipped with batteries when
using the mains adaptor with table stand.
1. Plug the mains adaptor which is connected to the table stand into a socket
(100-240 V ~/50-60 Hz).
2. Insert the operating unit into the table stand from the top.
"R-Tronic RTFC K"
Table stand
(option for
"RT B / RTF B")
remove batteries!
► The "R-Tronic is now ready for the "teach in" process (see paragraph 4.6).
NOTE
The "R-Tronic" is removed by pulling it vertically upward out of the table stand.
Installation and initial operation
- 17 von 64 -
(Illustr. 8)
Mains adaptor