oventrop R-Tronic RT B Installation And Operating Instructions Manual page 52

► The specific error or the incident impairing the function of the "R-Tronic" will be
displayed.
3. If an error occurred in an actuator (warning symbol active), press the menu-
button once starting from the submenu DIAGNOSIS ► AKTOR M CON B. All
connected wireless actuators respectively their AKTOR IDs will be displayed. If
you use several actuators, each individual actuator can be selected by turning
the menu-button.
4. Confirm the selection of the actuator in front of which the warning symbol is still
displayed (there is a problem with the actuator) by pressing the menu-button.
► The specific error or the incident impairing the function of the actuator will now be
shown on the "R-Tronic" display, see the below example:
NOTE
The exact specification of errors and malfunctions as well as remedial measures are
detailed in chapter 7 (Display notes and error messages).
Normally, errors do not occur in the "R-Tronic" and NO ERROR MESSAGE will be
displayed in the submenu DIAGNOSIS.
You can check the battery status of each actuator. Starting from the submenu
DIAGNOSIS, select the AKTOR M CON B ► AKTOR ID and confirm a selection. The
display will inform you about the battery status of the selected actuator, i.e. FULL,
MIDDLE, LOW or EMPTY.
- 52 von 64 -
Operation
(Illustr. 50)