Wall Attachment Of Fixing Plate "R-Tronic Rt B / Rtf B" (Battery Operation) - oventrop R-Tronic RT B Installation And Operating Instructions Manual

4.2 Wall attachment of fixing plate "R-Tronic RT B / RTF B"
(battery operation)
For the models "R-Tronic RT B" and "R-Tronic RTF B", power is either supplied by
batteries, a flush-mounted power pack or a mains adapter with table stand
(available as accessories). The "R-Tronic RTFC K" is always operated with a flush-
mounted power pack or a mains adaptor.
If the "R-Tronic" models "RT B" and "RTF B" shall be used for battery operation,
i.e. for standard operation, please proceed as follows:
1. Insert two AA 1.5 V Mignon batteries into the battery case.
The position of the batteries is specified by the markings +/-.
2. Screw the supplied fixing plate horizontally into the wall.
3. Insert the operating unit into the fixing plate from the top.
Fixing plate
► The "R-Tronic" is now ready for the "teach in" process (see paragraph 4.6).
Installation and initial operation
- 15 von 64 -
(Illustr. 5)
(Illustr. 6)
"R-Tronic RT B / RTF B"
(battery operation)