Wall Attachment Fixing Plate With Flush-Mounted Power Pack (Type "Rtfc K") - oventrop R-Tronic RT B Installation And Operating Instructions Manual

Installation and initial operation
4.3 Wall attachment fixing plate with flush-mounted power pack
(type "RTFC K")
DANGER Risk of electric shock!
As the flush-mounted power pack has to be connected to the
current supply of the house, there is a risk of an electric shock.
• Installation of the flush-mounted power pack must only be
carried out by a qualified electrician.
CAUTION Risk of fire due to overcharging of the batteries!
There is a risk of overcharging of the batteries (types "RT B" and
"RTF B") if the "R-Tronic" is equipped with batteries and is connected
to the 230 V network via the flush-mounted power pack.
• The operating unit "R-Tronic" must never be equipped with
batteries when using the flush-mounted power pack.
1. Switch off current supply before installation of the flush-mounted power pack.
2. Assemble the electrical connection between the flush-mounted power pack and
the 230 V connection in the flush socket.
3. Screw the fixing plate to the flush socket.
4. Insert the operating unit into the fixing plate from the top.
Fixing plate
Flush-mounted power pack
The flush-mounted mains adaptor has to be
installed so that the primary cables (1) and the
secondary cable (2) do not touch each other.
If necessary, these cables are to be fixed, for
instance with a cable retainer in order to guarantee
the physical separation.
► The "R-Tronic" is now ready for the "teach in" process (see paragraph 4.6).
Flush socket
1
Primary cables
2
Secondary cable
- 16 von 64 -
"R-Tronic RTFC K" (option for "RT B" / "RTF B")
230V
(Illustr. 7)
remove batteries!