Language; Default View Display; Offset Temperature Control - oventrop R-Tronic RT B Installation And Operating Instructions Manual

Operation

5.4.3 Language

You may select between the menu languages German, English, French, Spanish,
Italian and Polish. This is done as follows:
1. You are in the submenu SETTINGS. Confirm the selection by pressing the menu-
button. INSTALLATION will be displayed as before.
2. Turn the menu-button to the right and confirm the option LANGUAGE.
3. Select and confirm the menu language. The message SAVED will confirm your
entries.
► All information will now be displayed in the selected language.

5.4.4 Default view display

Here you may define the value that will be displayed in large size. The menu is
reached via SETTINGS ► DISPLAY and offers the following selection options:
 ACTUAL VALUE
 SET VALUE
 HUMIDITY in % RH
NOTE
The air humidity of the room is permanently measured by the "R-Tronic" models "TF"
and TFC" and is displayed in percent on the right hand side of the text line at the
bottom of the display. Please observe the information provided in chapter 9.
 CO2 CONCENTRATION in PPM
 ALTERNATING

5.4.5 OFFSET TEMPERATURE control

Temperature measurement of the room controller can be increased or reduced by 3
degrees Celsius in the submenu CONTROL. This might become necessary if the
temperature control is impaired by environmental influences such as cold outer walls.
To do so, select SETTINGS ► CONTROL ► OFFSET TEMPERATURE via the menu-
button and store the required value.
(Current room temperature in °C )
(Required temperature in °C)
(Display option "R-Tronic RTF B
/ RTFC K" only)
(Display option "R-Tronic RTFC K" only)
(Display alternates between
ACTUAL VALUE, SET VALUE,
AIR HUMIDTY, CO2 CONCENTRATION;
display option "R-Tronic RTFC K" only)
- 46 von 64 -