Transport, Packaging And Storage; Technical Data; Installation - oventrop Uni LDB Installation And Operating Instructions Manual

2.2 Possible dangers at the installation
location
WARNING!
The thermostatic valve and the pipe-
work may get very hot during opera-
tion and may lead to burns. Wear
safety gloves or inactivate the heat-
ing system before starting work!
The case of an external fire has not been
taken into consideration when constructing
the thermostat.
3 Transport, packaging and
storage
3.1 Transport inspection
Upon receipt, check the delivery for any dam-
ages caused during transit.
Any damages must be reported immediate-
ly upon receipt.
3.2 Storage
Only store the thermostat "Uni LDB" under
the following conditions:
• Do not store in open air, keep dry and free
from dust.
• Do not expose to aggressive fluids or heat
sources.
• Protect from direct sunlight.
• Storage temperature: -10°C to +50°C,
max. relative air humidity: 95 %
!
ATTENTION!
Protect the thermostat against exter-
nal forces (e.g. impacts, vibrations
etc.).

4 Technical data

Control range:
Setting scale:
Sensor element:
Max. sensor temperature:
Max. heating fluid temperature:
!
ATTENTION!
Suitable measures have to be taken
so that the maximum operating tem-
peratures are not exceeded.
2

5 Installation

1. Using a suitable tool (e.g. small screw-
2. Using the setting key (item no. 1011497),
7...28 °C
1 - 5
liquid sensor
50 °C
120 °C
w
NOTE!
We recommend having the thermostat
installed by a qualified tradesman.
WARNING!
The thermostatic valve and the pipe-
work may get very hot whilst the
heating system is in operation. There
is risk of burns. Wear safety gloves
or inactivate the heating system
when mounting the thermostat!
!
ATTENTION!
To avoid damage to the thermostat, it
must only be mounted once all build-
ing work has been completed!
driver), pull out the front cover disc
through the opening at the handwheel.
Illust. 1
turn the thermostat anticlockwise until
stop ("5") through the front bore.
Illust. 2
5