Menu "Temperatures - oventrop R-Tronic RT B Installation And Operating Instructions Manual

Operation
5.2

Menu "Temperatures"

Menu structure:
MAIN MENU
TEMPERATURES
TIME PROFILE
COMFORT TEMPERATURE
SETBACK TEMPERATURE
TEMPERATURE UNIT
The COMFORT TEMPERATURE and SETBACK TEMPERATURE of the standard
heating profiles can be set in the submenu TEMPERATURES according to your
requirements. As described above, they are preset to 20 °C (PROFILE ON),to 17 °C
(PROFILE OFF) or as alternating cycle between both values (PROFILE DAY/ NIGHT).
Your individual required temperatures can be set as follows:
1. Go to the main menu. After having pressed the menu button, you will reach the
submenu TIME PROFILE again. Turn the menu-button slightly to the right and
confirm the selection TEMPERATURES.
2. Define your COMFORT TEMPERATURE (different than 20 °C).
3. Confirm your entry by pressing the menu-button. The message SAVED will be
displayed shortly.
4. If the SETBACK TEMPERATURE shall be adapted too, turn the menu-button
slightly to the right again and confirm the selection SETBACK TEMPERATURE.
Enter a degree value as described before.
► The COMFORT TEMPERATURE and/or the SETBACK TEMPERATURE
for the standard heating profiles were adapted successfully.
FUNCTIONS
LIMIT MIN/MAX
- 38 von 64 -
SETTINGS
...
...
...
(Illustr. 39)
INFORMATION
(Illustr. 40)