Menu "Room Climate" (Only "R-Tronic Rtfc K") - oventrop R-Tronic RT B Installation And Operating Instructions Manual

5.5

Menu "Room climate" (only "R-Tronic RTFC K")

In comparison with the models "RT B" and "RTF B", the "R-Tronic RTFC K" features
an additional CO measured value detection. The integrated sensor continuously
2
measures the carbon dioxide content (CO
displayed when a defined value is exceeded. Excessive CO2 values have a negative
influence on the power of concentration and lead to tiredness.
NOTE
The "R-Tronic RTFC K" is preset to a reference value of 1,000 PPM. This is equivalent
to 1,000 parts ("parts per million) of CO
dioxide content of 0.1%. For comparison: The average CO
400 PPM or 0.04%.
The display of the "R-Tronic RTFC K" shows the CO
Values below 1,000 PPM are considered as standard value for a "good" room climate.
For this reason, the following symbol will be displayed if this value is
exceeded:
This is a recommendation for room ventilation (open window).
The threshold above which the above symbol will be displayed can be modified via
the menu ROOM CLIMATE ► CO2 ALERT THRESHOLD. This way you may
determine the CO
2
displayed:
1. Go to the MAIN MENU. After having pressed the menu-button you will reach the
submenu TIME PROFILE. Turn the menu-button to the right and confirm the
selection ROOM CLIMATE and the following selection CO2 ALERT
THRESHOLD.
2. Select a PPM value between 450 and 2.000 and confirm the selection SETTING.
The message SAVED will shortly appear on the display.
► From now on, a recommendation for room ventilation will be shown on the
"R-Tronic" display as soon as your individual CO2 threshold is exceeded. The
symbol will no longer be displayed as soon as the PPM value will have dropped
2
level at which the room ventilation recommendation will be
- 49 von 64 -
value) in the ambient air and it will be
2
per one million parts of room air or a carbon
2
content in the ambient air:
2
Operation
of outside air amounts to
(Illustr. 47)